SM25-5 scanning module only

Compare

$5,860.86

The SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application
The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.

SKU: A-2237-1115 Categories: ,
Physical measurement range ±0.5 mm deflection in all directions in all orientations
Physical overtravel range X,Y: ±2.0 mm
+Z: 1.7 mm
-Z: 1.2 mm
Resolution Capable of < 0.1 μm
Spring rate 0.6 N/mm to 0.2 N/mm – dependent on stylus length
Dimensions ∅25 mm x length dependent on module used
Mass SP25M body: 65 g
SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus)
SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus)
SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus)
SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus)
Mounting Multiwired autojoint connection:
compatible with PH10M PLUS, PH10MQ PLUS, AND PH6M
may be mounted to autojoint extension bars
Signal Outputs Non-linear and non-orthogonal analog outputs – rate, gain, and resolution are not fixed
Interface AC3 card

SM25-5 scanning module only
The SP25M comprises two sensors in a single housing. Users can switch between a choice of five scanning modules (which can carry M3 styli with lengths from 20 mm to 400 mm) and an adaptor module that is compatible with Renishaw’s TP20 range of probe modules. This capability enables scanning and touch-trigger probing in a single probe system.
The SP25M’s compact size and autojoint mounting makes it compatible with the PH10M PLUS / PH10MQ PLUS and PH6M probe heads. It can also be mounted on a multiwired extension bar. Together, these combinations permit excellent reach and access to part features.
“Weight: 45 g (1.59 oz) (including SH25-5 but excluding stylus)”

0/5 (0 Reviews)

Additional information

Weight 1 lbs
Dimensions 9 × 6 × 4 in

Quick Comparison

SettingsSM25-5 scanning module only removeØ1" datum ball removePH20 PH10MQ quill adaptor removeREVO® RSP2 V2 probe removePH20 calibration sphere removeDatum sphere fixing studs M6 × 1 remove
ImageRenishaw, SP25M special SCAN/TTP full combination kit, A-2237-1015Renishaw, Ø12 mm datum ball, A-1034-0005Renishaw, PH20 PH10MQ quill adaptor, A-3007-1720Renishaw, REVO® RSP2 V2 probe, A-3060-0028Renishaw, PH20 calibration sphere, A-1034-0026Renishaw, Datum sphere fixing studs M6 × 1, A-1034-0352
SKUA-2237-1115A-1034-0036A-3007-1720A-3060-0028A-1034-0026A-1034-0352
Rating
Price $5,860.86 $311.55 $34.41 $4,724.40 $506.85 $25.11
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry. Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below.
Weight112221
Dimensions9 × 6 × 4 in6 × 6 × 6 in6 × 6 × 6 in6 × 6 × 6 in6 × 6 × 6 in6 × 6 × 6 in
Additional information
Weight 1 lbs
Dimensions 9 × 6 × 4 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping