SM25-5 scanning module kit

Compare

$6,153.81

The SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application
The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.

SKU: A-2237-1105 Categories: ,
Physical measurement range ±0.5 mm deflection in all directions in all orientations
Physical overtravel range X,Y: ±2.0 mm
+Z: 1.7 mm
-Z: 1.2 mm
Resolution Capable of < 0.1 μm
Spring rate 0.6 N/mm to 0.2 N/mm – dependent on stylus length
Dimensions ∅25 mm x length dependent on module used
Mass SP25M body: 65 g
SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus)
SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus)
SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus)
SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus)
Mounting Multiwired autojoint connection:
compatible with PH10M PLUS, PH10MQ PLUS, AND PH6M
may be mounted to autojoint extension bars
Signal Outputs Non-linear and non-orthogonal analog outputs – rate, gain, and resolution are not fixed
Interface AC3 card

SM25-5 scanning module kit
“Range of scanning modules designed to provide optimised scanning performance over their specified
stylus length ranges”
SM25-5 recommended for use with non-linear and star stylus arrangements
Includes:
1 × SM25-5
2 × SH25-5
“Weight: 45 g (1.59 oz) (including SH25-5 but excluding stylus)”

0/5 (0 Reviews)

Additional information

Weight 1 lbs
Dimensions 9 × 6 × 4 in

Quick Comparison

SettingsSM25-5 scanning module kit removePH20 large quill adaptor removeØ12 mm datum ball removeRSH3-1 removeDatum sphere fixing studs M8 × 1.25 removePH10MQ PLUS remove
ImageRenishaw, SP25M special SCAN/TTP full combination kit, A-2237-1015Renishaw, PH20 large quill adaptor, A-3007-1717Renishaw, Ø12 mm datum ball, A-1034-0005Renishaw, RSH3-1, A-3061-2521Renishaw, Datum sphere fixing studs M6 × 1, A-1034-0352Renishaw, PH10MQ PLUS, A-5863-6000
SKUA-2237-1105A-3007-1717A-1034-0005A-3061-2521A-1034-0351A-5863-6000
Rating
Price $6,153.81 $196.23 $311.55 $202.74 $25.11 $22,381.38
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry. Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.Includes: PA25 - RSH3 A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below.The PH10MQ PLUS can be mounted vertically inside the CMM’s quill for a greater working envelope by increasing the Z axis travel. The specification of the PH10MQ PLUS is identical to that of the PH10M PLUS, with the following exceptions: Head mounting: Direct to quill Dimensions: Length 73 mm, width 80 mm Weight: 730 g Part number: A-5863-6000
Weight121113
Dimensions9 × 6 × 4 in6 × 6 × 6 in6 × 6 × 6 in6 × 6 × 6 in6 × 6 × 6 in10 × 8 × 5 in
Additional information
Weight 1 lbs
Dimensions 9 × 6 × 4 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 3 lbs
Dimensions 10 × 8 × 5 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping