SM25-4 entry level module kit

Compare

$6,223.56

The SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application
The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.

SKU: A-2237-1108 Categories: ,
Physical measurement range ±0.5 mm deflection in all directions in all orientations
Physical overtravel range X,Y: ±2.0 mm
+Z: 1.7 mm
-Z: 1.2 mm
Resolution Capable of < 0.1 μm
Spring rate 0.6 N/mm to 0.2 N/mm – dependent on stylus length
Dimensions ∅25 mm x length dependent on module used
Mass SP25M body: 65 g
SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus)
SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus)
SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus)
SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus)
Mounting Multiwired autojoint connection:
compatible with PH10M PLUS, PH10MQ PLUS, AND PH6M
may be mounted to autojoint extension bars
Signal Outputs Non-linear and non-orthogonal analog outputs – rate, gain, and resolution are not fixed
Interface AC3 card

SM25-4 entry level module kit
“Range of scanning modules designed to provide optimised scanning performance over their specified
stylus length ranges:”
SM25-1 / 2 / 3 / 4 recommended for use with linear stylus arrangements
Includes:
1 × SM25-4
1 × SH25-4
basic stylus kit containing:
1 × M3 stylus D10R L100 EWL100 d4C/F
2 × M2-M3 stylus tools
Weight: 71 g (2.50 oz) (including SH25-4 but excluding stylus)

0/5 (0 Reviews)

Additional information

Weight 1 lbs
Dimensions 12 × 12 × 4 in

Quick Comparison

SettingsSM25-4 entry level module kit removePH10T PLUS removeØ1" datum ball removePH10M-iQ PLUS removePH20 large quill adaptor removeØ19 mm datum ball remove
ImageRenishaw, SP25M special SCAN/TTP full combination kit, A-2237-1015Renishaw, PH10T PLUS, A-5863-5000Renishaw, Ø12 mm datum ball, A-1034-0005Renishaw, PH10M-iQ PLUS, A-5863-7000Renishaw, PH20 large quill adaptor, A-3007-1717Renishaw, Ø12 mm datum ball, A-1034-0005
SKUA-2237-1108A-5863-5000A-1034-0036A-5863-7000A-3007-1717A-1034-0023
Rating
Price $6,223.56 $19,733.67 $311.55 $25,288.56 $196.23 $311.55
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry. Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.The new PH10T PLUS motorized probe head allows complete, rapid, and repeatable inspection of most complex components with minimum human intervention. Full orientation of your TP2, TP6, TP20 or TP200 probe between any of 720 positions, under manual or program control, turns your 3 axis CMM into a 5 axis machine.PH10M-iQ PLUS functions identically to a traditional PH10M PLUS but with the addition of inferred qualification technology. Inferred qualification increases throughput by removing the need to qualify each head position that is used in a measurement program. PH10M-iQ PLUS works with all PH10M compatible probes, but only touch-trigger probe configurations can utilize inferred qualification. Scanning probes can be used in traditional PH10M qualification mode but cannot use inferred qualification.
Weight131321
Dimensions12 × 12 × 4 in10 × 8 × 5 in6 × 6 × 6 in10 × 8 × 5 in6 × 6 × 6 in6 × 6 × 6 in
Additional information
Weight 1 lbs
Dimensions 12 × 12 × 4 in
Weight 3 lbs
Dimensions 10 × 8 × 5 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 3 lbs
Dimensions 10 × 8 × 5 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping