SH25-4 stylus holder only

Compare

$494.76

The SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application
The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.

SKU: A-2237-1304 Categories: ,
Physical measurement range ±0.5 mm deflection in all directions in all orientations
Physical overtravel range X,Y: ±2.0 mm
+Z: 1.7 mm
-Z: 1.2 mm
Resolution Capable of < 0.1 μm
Spring rate 0.6 N/mm to 0.2 N/mm – dependent on stylus length
Dimensions ∅25 mm x length dependent on module used
Mass SP25M body: 65 g
SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus)
SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus)
SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus)
SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus)
Mounting Multiwired autojoint connection:
compatible with PH10M PLUS, PH10MQ PLUS, AND PH6M
may be mounted to autojoint extension bars
Signal Outputs Non-linear and non-orthogonal analog outputs – rate, gain, and resolution are not fixed
Interface AC3 card

SH25-4 stylus holder only
The SH25 range of stylus holders enables accurate scanning measurements with effective stylus lengths ranging from 20 mm – 400 mm. They have a kinematic coupling that connects to their respective SM25 scanning modules to provide a repeatable connection that eliminates the need for probe requalification after a change. The stylus holders are designed to only fit with their respective scanning module. They should be used with Renishaws M3 range of styli.
The SH25-4 stylus holder has an effective stylus reach of 220 mm – 400 mm.
Please note: The SH25-1/2/3/4 holders are recommended for use with linear stylus arrangements, while the SH25-5 and SH25-2A/3A/4A holders are recommended for use with cranked and star stylus arrangements.

0/5 (0 Reviews)

Additional information

Weight 1 lbs
Dimensions 12 × 12 × 4 in

Quick Comparison

SettingsSH25-4 stylus holder only removeDatum sphere fixing studs M8 × 1.25 removePH10MQ PLUS removePH20 PH10MQ quill adaptor removeDatum sphere fixing studs M6 × 1 removeØ3/4" datum ball remove
ImageRenishaw, SP25M special SCAN/TTP full combination kit, A-2237-1015Renishaw, Datum sphere fixing studs M6 × 1, A-1034-0352Renishaw, PH10MQ PLUS, A-5863-6000Renishaw, PH20 PH10MQ quill adaptor, A-3007-1720Renishaw, Datum sphere fixing studs M6 × 1, A-1034-0352Renishaw, Ø12 mm datum ball, A-1034-0005
SKUA-2237-1304A-1034-0351A-5863-6000A-3007-1720A-1034-0352A-1034-0032
Rating
Price $494.76 $25.11 $22,381.38 $34.41 $25.11 $311.55
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry. Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below.The PH10MQ PLUS can be mounted vertically inside the CMM’s quill for a greater working envelope by increasing the Z axis travel. The specification of the PH10MQ PLUS is identical to that of the PH10M PLUS, with the following exceptions: Head mounting: Direct to quill Dimensions: Length 73 mm, width 80 mm Weight: 730 g Part number: A-5863-6000A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below.
Weight113211
Dimensions12 × 12 × 4 in6 × 6 × 6 in10 × 8 × 5 in6 × 6 × 6 in6 × 6 × 6 in6 × 6 × 6 in
Additional information
Weight 1 lbs
Dimensions 12 × 12 × 4 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 3 lbs
Dimensions 10 × 8 × 5 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping