These two straight cables each have a 15-pin D-type plug at end ‘A’ and a 14-pin chassis-mount LEMO socket supplied loose for fitment to end ‘B’. They reside within the CMM axis conduits and link with the probe head cables to relay the motorized probe head and controller signals.
These are also used to link with adaptor cables and relay SP80 scanning probe signals to and from Renishaw controllers or equivalent counter cards via an IU80 interpolator unit.
Overall Length: 4 m (13 ft)
Machine Connector: PH10 cable to PHC10-3 controller (chassis)
|Dimensions||12 × 12 × 6 in|
|Settings||PLM7(T) remove||PH20 small quill adaptor remove||PH20 PH10MQ quill adaptor remove||Ø19 mm datum ball remove||PH20 shank adaptor remove||Datum sphere fixing studs M10 × 1.5 remove|
|Add to cart|
|Description||A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below.|
|Dimensions||12 × 12 × 6 in||6 × 6 × 6 in||6 × 6 × 6 in||6 × 6 × 6 in||6 × 6 × 6 in||6 × 6 × 6 in|