| Application | TP1, MIP, TP2, TP20, TP6, TP6A, |
| TP200, MH20, and MH20i | |
| Power supply | 85 V – 264 V, 47 Hz – 66 Hz |
| Dimensions | Height: 88 mm (3.46 in) |
| Width: 146 mm (5.75 in) | |
| Depth: 183 mm (7.19 in) | |
| Input | 9 way “D” type socket |
| Compatability | Output PICS/SSR |
PI200-3
Compare$797.94
The PI200-3 interface can be interconnected within the majority of Renishaw’s manual and motorized probing installations with no additional CMM communications or control signalling required. Optimum performance will be obtained on installations utilizing probe damping or halt signal facilities. Probe signalling between TP200 and PI200-3 must be direct and uninterrupted. Probe signal interfacing may be present within some CMM cabling arrangements. Call Renishaw for further details.
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Quick Comparison
| Settings | PI200-3 remove | Datum sphere fixing studs M10 × 1.5 remove | Datum sphere fixing studs M8 × 1.25 remove | Datum sphere fixing studs 5/16–18 UNC remove | PH20 small quill adaptor remove | PH10M-iQ PLUS remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  | | |  |  | ||||||||||||||||||||||||
| SKU | A-5707-0100 | A-1034-0350 | A-1034-0351 | A-1034-0354 | A-3007-1716 | A-5863-7000 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | $797.94 | $25.11 | $25.11 | $25.11 | $196.23 | $25,288.56 | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | The PI200-3 interface can be interconnected within the majority of Renishaw’s manual and motorized probing installations with no additional CMM communications or control signalling required. Optimum performance will be obtained on installations utilizing probe damping or halt signal facilities. Probe signalling between TP200 and PI200-3 must be direct and uninterrupted. Probe signal interfacing may be present within some CMM cabling arrangements. Call Renishaw for further details. | A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below. | A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below. | A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below. | PH10M-iQ PLUS functions identically to a traditional PH10M PLUS but with the addition of inferred qualification technology. Inferred qualification increases throughput by removing the need to qualify each head position that is used in a measurement program. PH10M-iQ PLUS works with all PH10M compatible probes, but only touch-trigger probe configurations can utilize inferred qualification. Scanning probes can be used in traditional PH10M qualification mode but cannot use inferred qualification. | |||||||||||||||||||||||||
| Weight | 3 | 1 | 1 | 1 | 2 | 3 | ||||||||||||||||||||||||
| Dimensions | 12 × 12 × 6 in | 6 × 6 × 6 in | 6 × 6 × 6 in | 6 × 6 × 6 in | 6 × 6 × 6 in | 10 × 8 × 5 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|