Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 75.0 mm, ML 62.0 mm, for Zeiss applications
Compare$131.13
M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 75.0 mm, ML 62.0 mm, for Zeiss applications
M5 straight stylus.
Note: measurement length is to end of ball.
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| DK | 8.00 mm |
| ML1/ML | 62.0 mm |
| DG/D | 11.00 mm |
| L | 75.0 mm |
| DS1/DS | 7.30 mm |
| Weight | 7.30 g |
Quick Comparison
| Settings | M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 75.0 mm, ML 62.0 mm, for Zeiss applications remove | PH10MQ PLUS remove | PH20 calibration stylus remove | Datum sphere fixing studs 5/16–18 UNC remove | PH10M-iQ PLUS remove | Ø12 mm datum ball remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | A-5555-2010 | A-5863-6000 | A-5004-2182 | A-1034-0354 | A-5863-7000 | A-1034-0005 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | $131.13 | $22,381.38 | $93.00 | $25.11 | $25,288.56 | $311.55 | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 75.0 mm, ML 62.0 mm, for Zeiss applications
M5 straight stylus.
Note: measurement length is to end of ball.
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| The PH10MQ PLUS can be mounted vertically inside the CMM’s quill for a greater working envelope by increasing the Z axis travel. The specification of the PH10MQ PLUS is identical to that of the PH10M PLUS, with the following exceptions: Head mounting: Direct to quill Dimensions: Length 73 mm, width 80 mm Weight: 730 g Part number: A-5863-6000 | A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below. | PH10M-iQ PLUS functions identically to a traditional PH10M PLUS but with the addition of inferred qualification technology. Inferred qualification increases throughput by removing the need to qualify each head position that is used in a measurement program. PH10M-iQ PLUS works with all PH10M compatible probes, but only touch-trigger probe configurations can utilize inferred qualification. Scanning probes can be used in traditional PH10M qualification mode but cannot use inferred qualification. | ||||||||||||||||||||||||||
| Weight | 1 | 3 | 1 | 1 | 3 | 1 | ||||||||||||||||||||||||
| Dimensions | 6 × 6 × 6 in | 10 × 8 × 5 in | 6 × 6 × 6 in | 6 × 6 × 6 in | 10 × 8 × 5 in | 6 × 6 × 6 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|