M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 63.5 mm, ML 50.5 mm, for Zeiss applications

Compare

$130.20

M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 63.5 mm, ML 50.5 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626105-0821-063.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 8.00 mm
ML1/ML 50.5 mm
DG/D 11.00 mm
L 63.5 mm
DS1/DS 6.00 mm
Weight 7.00 g

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 6 in

Quick Comparison

SettingsM5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 63.5 mm, ML 50.5 mm, for Zeiss applications removeDatum sphere fixing studs M6 × 1 removePH10MQ PLUS removePH10T PLUS removePH20 large quill adaptor removePH20 small quill adaptor remove
ImageRenishaw, M5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 63.5 mm, ML 50.5 mm, for Zeiss applications, A-5555-0720Renishaw, Datum sphere fixing studs M6 × 1, A-1034-0352Renishaw, PH10MQ PLUS, A-5863-6000Renishaw, PH10T PLUS, A-5863-5000Renishaw, PH20 large quill adaptor, A-3007-1717Renishaw, PH20 small quill adaptor, A-3007-1716
SKUA-5555-0720A-1034-0352A-5863-6000A-5863-5000A-3007-1717A-3007-1716
Rating
Price $130.20 $25.11 $22,381.38 $19,733.67 $196.23 $196.23
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionM5 Ø8 mm silicon nitride ball, thermostable Carbon Fiber stem, L 63.5 mm, ML 50.5 mm, for Zeiss applications M5 straight stylus. Equivalent to Zeiss part number: 626105-0821-063. Note: measurement length is to end of ball. Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
DK 8.00 mm
ML1/ML 50.5 mm
DG/D 11.00 mm
L 63.5 mm
DS1/DS 6.00 mm
Weight 7.00 g
A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below.The PH10MQ PLUS can be mounted vertically inside the CMM’s quill for a greater working envelope by increasing the Z axis travel. The specification of the PH10MQ PLUS is identical to that of the PH10M PLUS, with the following exceptions: Head mounting: Direct to quill Dimensions: Length 73 mm, width 80 mm Weight: 730 g Part number: A-5863-6000The new PH10T PLUS motorized probe head allows complete, rapid, and repeatable inspection of most complex components with minimum human intervention. Full orientation of your TP2, TP6, TP20 or TP200 probe between any of 720 positions, under manual or program control, turns your 3 axis CMM into a 5 axis machine.
Weight113322
Dimensions6 × 6 × 6 in6 × 6 × 6 in10 × 8 × 5 in10 × 8 × 5 in6 × 6 × 6 in6 × 6 × 6 in
Additional information
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 1 lbs
Dimensions 6 × 6 × 6 in
Weight 3 lbs
Dimensions 10 × 8 × 5 in
Weight 3 lbs
Dimensions 10 × 8 × 5 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Weight 2 lbs
Dimensions 6 × 6 × 6 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare