Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
M5 Ø1.5 mm silicon nitride ball, tungsten carbide stem, L 30 mm, ML 8.0/20.0 mm, for Zeiss applications
Compare$48.36
M5 Ø1.5 mm silicon nitride ball, tungsten carbide stem, L 30 mm, ML 8.0/20.0 mm, for Zeiss applications
Note: measurement length is to end of ball.
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| DK (mm) | 1.5 |
| L (mm) | 30 |
| DG (mm) | 11 |
| ML1 (mm) | 8 |
| ML (mm) | 20 |
| DS1 (mm) | 1 |
| DS (mm) | 1.5 |
| Weight (g) | 3.5 |
Quick Comparison
| Settings | M5 Ø1.5 mm silicon nitride ball, tungsten carbide stem, L 30 mm, ML 8.0/20.0 mm, for Zeiss applications remove | Datum sphere fixing studs M8 × 1.25 remove | Ø19 mm datum ball remove | PH10M PLUS remove | PH20 calibration stylus remove | PH10M-iQ PLUS remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | A-5555-3780 | A-1034-0351 | A-1034-0023 | A-5863-4000 | A-5004-2182 | A-5863-7000 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | $48.36 | $25.11 | $311.55 | $22,381.38 | $93.00 | $25,288.56 | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | M5 Ø1.5 mm silicon nitride ball, tungsten carbide stem, L 30 mm, ML 8.0/20.0 mm, for Zeiss applications
Note: measurement length is to end of ball.
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| A fixing stud is required with each kit to attach the pillar to the table surface. Select one from the list below. | The PH10M PLUS motorized probe head has been developed for the new generation of contact and non-contact scanning probes. It has three times the torque of PH10 PLUS, allowing probe extension bars up to 300 mm long to be used. The PH10M PLUS has an autojoint mounting. | PH10M-iQ PLUS functions identically to a traditional PH10M PLUS but with the addition of inferred qualification technology. Inferred qualification increases throughput by removing the need to qualify each head position that is used in a measurement program. PH10M-iQ PLUS works with all PH10M compatible probes, but only touch-trigger probe configurations can utilize inferred qualification. Scanning probes can be used in traditional PH10M qualification mode but cannot use inferred qualification. | ||||||||||||||||||||||||||
| Weight | 1 | 1 | 1 | 3 | 1 | 3 | ||||||||||||||||||||||||
| Dimensions | 6 × 6 × 6 in | 6 × 6 × 6 in | 6 × 6 × 6 in | 10 × 8 × 5 in | 6 × 6 × 6 in | 10 × 8 × 5 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|