M4 CMM and Equator system component set: Clamping

$881.64

M4 CMM and Equator system component set: Clamping

The M4 CMM and Equator system clamping kits can be used to
hold brass, titanium, aluminum, plastic and other non-ferrous parts.

To build your kit, select an appropriately sized base plate for your requirements with M4 threaded holes. Don’t forget to ask your sales representative to add on plate clamps or mounting holes to your order to secure your plate to the CMM granite.
* Component does not have a threaded top

Included Part numbers Description Count
R-S-610-4* 6 mm dia. × 10 mm standoff 3
R-S-625-4* 6 mm dia. × 2 mm standoff 3
R-S-95-4* 9 mm dia. × 5 mm standoff 3
R-S-910-4 9 mm dia. × 10 mm standoff 3
R-S-925-4 9 mm dia. × 25 mm standoff 3
R-S-950-4 9 mm dia. × 50 mm standoff 2
R-S-1210-4 12 mm dia. × 12 mm standoff 3
R-S-1225-4 12 mm dia. × 25 mm standoff 3
R-S-1250-4 12 mm dia. × 50 mm standoff 2
R-SP-610-4 6 mm dia. × 10 mm pin standoff 2
R-SP-910-4 9 mm dia. × 10 mm pin standoff 2
R-CT-40-25-4 40 mm tension clamp with 25 mm post 2
R-CW-25-25-4 25 mm wire clamp with 25 mm post 3
R-CW-50-50-4 50 mm wire clamp with 50 mm post 2
R-RPA-4 Aluminum resting pin 4
R-AJ-9-4 9 mm dia. adjustable jackstand 1
R-AS-30-4 30 mm long adjustable slide 1
R-AS-45-4 45 mm long adjustable slide 1
R-TB-1619-4 Tower block with base 16 mm² × 19 mm 1
R-TC-300190-4 300 mm × 190 mm × 25 mm component tray 1
R-BC10 50 mm × 200 mm × 150 mm compartment box
(not shown)
1
Total number of components in each set
46
SKU: R-FSC-CA-4 Category:

Additional information

Weight 8 lbs
Dimensions 20 × 20 × 12 in