Dial Indicators – Series 2 – Metric Standard Type

Compare

Starting at
$76.91

Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.
Standard 0.01mm graduation dial gages having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard.
The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
A carbide contact point is used.
The grand gear uses stainless steel that is resistant to wear and deformation.
Application of a hard coating on the surface of the crystal makes the gage highly scratch- and chemical-resistant.

Clear
Add to Projects List
SKU: N/A Category:
SKURange / Range/RevolutionAccuracyGraduationDial ReadingForceTypePriceBuyhf:att:pa_10-pin-digimatic-inputhf:att:pa_2d-viewhf:att:pa_a-axis-indexinghf:att:pa_ac-adapterhf:att:pa_academic-licensehf:att:pa_angle-directionhf:att:pa_applicable-gagehf:att:pa_archive-datahf:att:pa_assignable-cause-actionhf:att:pa_attribute-msa-4hf:att:pa_attribute-short-methodhf:att:pa_audit-trailshf:att:pa_auto-generated-emailshf:att:pa_automates-reportinghf:att:pa_b-axis-indexinghf:att:pa_batch-data-collectionhf:att:pa_batteryhf:att:pa_battery-lifehf:att:pa_bias-studyhf:att:pa_bluetooth-4-2hf:att:pa_bracket-kithf:att:pa_cable-lengthhf:att:pa_cable-namehf:att:pa_cable-typehf:att:pa_classic-spc-viewshf:att:pa_cloud-environmenthf:att:pa_collection-schedulerhf:att:pa_colorhf:att:pa_column-row-mappinghf:att:pa_connectionhf:att:pa_connection-cable-requiredhf:att:pa_connection-typehf:att:pa_connection-unit-requiredhf:att:pa_continuous-data-sendhf:att:pa_custom-calibration-certhf:att:pa_custom-calibration-prochf:att:pa_custom-report-templateshf:att:pa_d2hf:att:pa_data-entryhf:att:pa_data-inputhf:att:pa_data-outputhf:att:pa_data-processing-0hf:att:pa_data-processing-1hf:att:pa_data-processing-3hf:att:pa_data-reception-indicationhf:att:pa_data-send-buttonhf:att:pa_data-send-switchhf:att:pa_data-storagehf:att:pa_datasheethf:att:pa_depth-of-fieldhf:att:pa_displayhf:att:pa_editionhf:att:pa_electronic-signatureshf:att:pa_email-alertshf:att:pa_external-controlhf:att:pa_factory-quality-dashboardhf:att:pa_filterhf:att:pa_fithf:att:pa_fit-transmitterhf:att:pa_footswitch-connectionhf:att:pa_form-vision-connectivityhf:att:pa_free-mobile-appshf:att:pa_functionhf:att:pa_gage-capacityhf:att:pa_gage-managementhf:att:pa_gage-rrhf:att:pa_head-mountinghf:att:pa_hoops-3d-viewhf:att:pa_import-asciihf:att:pa_import-gage-libraryhf:att:pa_improves-work-efficiencyhf:att:pa_includes-sql-expresshf:att:pa_inputshf:att:pa_item-typehf:att:pa_lengthhf:att:pa_linearity-studyhf:att:pa_live-collection-dashboardhf:att:pa_manager-viewshf:att:pa_masshf:att:pa_max-min-tirhf:att:pa_maximum-extension-barhf:att:pa_measuring-toolshf:att:pa_merge-copy-and-edit-datahf:att:pa_modelhf:att:pa_mounting-optionshf:att:pa_network-connectedhf:att:pa_number-of-licenseshf:att:pa_operating-temperature-rangehf:att:pa_optional-vcp-drivershf:att:pa_outputhf:att:pa_outside-dimensionshf:att:pa_overtravel-break-loadhf:att:pa_pass-thru-port-inputhf:att:pa_pc-requirementhf:att:pa_polling-from-pchf:att:pa_positional-repeatabilityhf:att:pa_positionshf:att:pa_power-supplyhf:att:pa_print-capacityhf:att:pa_print-speedhf:att:pa_printer-paperhf:att:pa_printing-methodhf:att:pa_probe-mountinghf:att:pa_probe-socketshf:att:pa_probe-status-indicationhf:att:pa_process-analyzerhf:att:pa_process-managerhf:att:pa_range-x-axishf:att:pa_range-y-axishf:att:pa_real-time-professionalhf:att:pa_real-time-standardhf:att:pa_remarkshf:att:pa_repeatability-of-positionhf:att:pa_report-schedulerhf:att:pa_request-datahf:att:pa_resolutionhf:att:pa_rs-232c-cablehf:att:pa_rs232-outputhf:att:pa_scatter-charthf:att:pa_serial-rs232-inputhf:att:pa_signalhf:att:pa_spc-cablehf:att:pa_stability-studyhf:att:pa_suitable-interfaceshf:att:pa_summary-analysishf:att:pa_supplies-5vhf:att:pa_support-capabilityhf:att:pa_supported-oshf:att:pa_supports-mobile-deviceshf:att:pa_supports-u-wavehf:att:pa_supports-usb-input-toolhf:att:pa_supports-usb-itnhf:att:pa_tagging-datahf:att:pa_tech-support-includedhf:att:pa_test-for-normalityhf:att:pa_timed-data-collectionhf:att:pa_timed-data-sendhf:att:pa_timer-inputhf:att:pa_tolerance-judgementhf:att:pa_track-gage-calibrationhf:att:pa_transmitterhf:att:pa_type-1-studyhf:att:pa_u-wave-bluetoothhf:att:pa_u-wave-r-requiredhf:att:pa_u-wave-r-unitshf:att:pa_u-wave-thf:att:pa_u-wave-t-unitshf:att:pa_usb-cablehf:att:pa_usb-drivershf:att:pa_usb-outputhf:att:pa_variable-crossed-anovahf:att:pa_variable-crossed-rangehf:att:pa_variable-nested-anovahf:att:pa_variable-nested-rangehf:att:pa_variable-range-methodhf:att:pa_workgroup-site-licensehf:att:pa_workpiece-max-load
2044A5mm/1mm0.012mm0.010-1001.4N or lessw/ Lug$76.91
2044A-095mm/1mm0.013mm0.010-1001.4N or lessw/ Lug$88.83
2044AB5mm/1mm0.012mm0.010-1001.5N or lessFlat-Back$76.91
2044AB-095mm/1mm0.013mm0.010-1001.4N or lessFlat-Back$88.83
2045S5mm/1mm0.012mm0.010-50-01.4N or lessw/ Lug$77.63
2045AB5mm/1mm0.012mm0.010-50-02.5N or lessFlat-Back$77.63
2046A10mm/1mm0.013mm0.010-1001.4N or lessw/ Lug$116.10
2046A-0910mm/1mm0.015mm0.010-1001.4N or lessw/ Lug$123.30
2046A-6010mm/1mm0.013mm0.010-1002.5N or lessw/ Lug$172.80
2046AB10mm/1mm0.013mm0.010-1001.4N or lessFlat-Back$116.10
2046SB-0910mm/1mm0.015mm0.010-1001.4N or lessFlat-Back$123.30
2046SB-6010mm/1mm0.013mm0.010-1002.5N or lessFlat-Back$162.90
2047A10mm/1mm0.013mm0.010-50-01.4N or lessw/ Lug$116.10
2047AB10mm/1mm0.013mm0.010-50-01.4N or lessFlat-Back$116.10
2050A20mm/1mm0.020mm0.010-1002.0N or lessw/ Lug$139.50
2050S-6020mm/1mm0.020mm0.010-1002.5N or lessw/ Lug$172.80
2050AB20mm/1mm0.020mm0.010-1002.0N or lessFlat-Back$139.50
2050AB-1920mm/1mm0.020mm0.010-1002.0N or lessFlat-Back$157.50
2050AB-6020mm/1mm0.020mm0.010-1002.5N or lessFlat-Back$172.80
2052A30mm/1mm0.025mm0.010-1002.5N or lessw/ Lug$174.60
2052A-1930mm/1mm0.025mm0.010-1002.5N or lessw/ Lug$191.70
2052SB30mm/1mm0.025mm0.010-1002.5N or lessFlat-Back$174.60
2052SB-1930mm/1mm0.025mm0.010-1002.5N or lessFlat-Back$174.60
2109A-101mm/0.2mm0.005mm0.0010-100-01.5N or lessw/ Lug$205.20
2109A-701mm/0.2mm0.005mm0.0010-100-01.5N or lessw/ Lug$256.50
2109AB-702mm/0.2mm0.005mm0.0010-100-01.5N or lessFlat-Back$256.50
2110A-101mm/0.1mm0.005mm0.0010-1001.5N or lessw/ Lug$210.60
2110AB-101mm/0.1mm0.005mm0.0010-1001.5N or lessFlat-Back$210.60
2110AB-701mm/0.1mm0.005mm0.0010-1002.0N or lessFlat-Back$184.50
2113A-102mm/0.2mm0.007mm0.0010-100-01.5N or lessw/ Lug$190.80
2113AB-102mm/0.2mm0.007mm0.0010-100-01.5N or lessFlat-Back$190.80
2118S-105mm/0.2mm0.010mm0.0010-100-1001.5N or lessw/ Lug$206.10
2118AB-105mm/0.2mm0.010mm0.0010-100-1001.5N or lessFlat-Back$192.60
2119AB-105mm/0.2mm0.010mm0.0010-100-01.5N or lessFlat-Back$196.20
2124S-105mm/0.5mm0.012mm0.0050-501.5N or lessw/ Lug$144.90
2310AB-1010mm/1mm0.015mm0.010-1001.4N or lessFlat-Back$119.70
2320S-1020mm/1mm0.020mm0.010-1002.0N or lessw/ Lug$139.50
2320AB-1020mm/1mm0.020mm0.010-1002.0N or lessFlat-Back$139.50
2330A-1030mm/1mm0.025mm0.010-1002.5N or lessw/ Lug$174.60
2330SB-1030mm/1mm0.025mm0.010-1002.5N or lessFlat-Back$169.20
2902A10mm/1mm0.013mm0.01100-01.4N or lessw/ Lug$101.70
2902AB10mm/1mm0.013mm0.01100-01.4N or lessFlat-Back$101.70
2952A30mm/1mm0.025mm0.01100-02.5N or lessw/ Lug$207.90
2952SB30mm/1mm0.025mm0.01100-02.5N or lessFlat-Back$214.20

Features

Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.
Standard 0.01mm graduation dial gages having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard.
The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
A carbide contact point is used.
The grand gear uses stainless steel that is resistant to wear and deformation.
Application of a hard coating on the surface of the crystal makes the gage highly scratch- and chemical-resistant.

Additional information

Weight N/A
Dimensions N/A
Graduation

0.01, 0.001, 0.005
Range

5mm/1mm, 10mm/1mm, 20mm/1mm, 30mm/1mm, 1mm/0.2mm, 2mm/0.2mm, 1mm/0.1mm, 5mm/0.2mm, 5mm/0.5mm
Dial Reading

0-100, 0-50-0, 100-0, 0-100-0, 0-100-100, 0-50
Model Type

w/ Lug, Flat-Back
Accuracy

0.012mm, 0.013mm, 0.015mm, 0.020mm, 0.025mm, 0.005mm, 0.007mm, 0.010mm
Force

1.4N or less, 2.5N or less, 1.5N or less, 2.0N or less

Reviews

There are no reviews yet.

Be the first to review “Dial Indicators – Series 2 – Metric Standard Type”

Your email address will not be published.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the compare bar
Compare
Compare ×
Let's Compare! Continue shopping