ABSOLUTE Digimatic Indicator ID-C – Series 543 – Calculation Type

Starting at
$466.20

The new Calculation-Type Digimatic Indicator features both a Key- Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Improved parameter setting software makes easy to set all available parameters, and determine and upload the proper coefficients for calculation. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50, allowing higher accuracy measurements of TIR and MAX/MIN.
An analog bar provides easy-to-read values when scanning for Max, Min, and TIR Values.
The Absolute Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x) while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without the need for conversions.

Clear
SKU: N/A Category:
SKUItem Typemodel-no:Model No.rangeaccuracylcd-resolution:LCD Resolutionmeasuring-force:Measuring ForcePriceBuyhf:att:pa_item-type
543-341BInch/Metric.5in 12.7mm.00012in$466.20
inch-metric
543-342BInch/Metric.5in 12.7mm.00012in$466.20
inch-metric
543-591BInch/Metric1in 25.4mm.00012in$625.30
inch-metric
543-592BInch/Metric1in 25.4mm.00012in$625.30
inch-metric
543-596BInch/Metric2in 50.8mm.00025in$784.40
inch-metric
543-597BInch/Metric2in 50.8mm.00025in$784.40
inch-metric
543-340BMetric0-12.7mm0.003mm$466.20
metric
543-590BMetric0-25.4mm0.003mm$625.30
metric
543-595BMetric0-50.8mm0.006mm$784.40
metric

Optional Accessories

SKUdescriptionPriceBuy
21EZA198Spindle lifting lever (ISO/JIS type)$6.55
21EZA199Spindle lifting lever (ANSI/AGD type)$6.00
21JZA295Spindle lifting cable (stroke: .4” / 10mm)$49.65
21EZA313Parameter Setting USB Cable$463.00
21EZA197Spindle lifting knob(25.4mm/1",50.8/2" models)$61.20
21EZA200Spindle lifting knob(50.8mm/2")$61.20

Features

The new Calculation-Type Digimatic Indicator features both a Key- Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Improved parameter setting software makes easy to set all available parameters, and determine and upload the proper coefficients for calculation. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50, allowing higher accuracy measurements of TIR and MAX/MIN.
An analog bar provides easy-to-read values when scanning for Max, Min, and TIR Values.
The Absolute Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x) while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without the need for conversions.

Technical Data

Resolution: 12 Steps .00005/.0001/.0005” 0.001/0.01mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance-typelinear encoder
Max. response speed: Unlimited
Measuring force: Refer to the list of specifications
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.

Function

Key Lock, Parameter Lock, PC-USB Input, Analog Bar, FAST measurement frequency, Preset (up to 3 values), Tolerance Judgment , Peak Detection , Calculation, inch/mm conversion (on inch/metric models only), Counting direction switching
Data Output
Alarm: Low voltage, Counting value composition error,Over-flow error, Tolerance limit setting error

Optional Accessories

905338: Connecting Cable (1m)
905409: Connecting Cable (2m)
21EZA313: Parameter Setting USB Cable
21EZA198: Spindle lifting lever (12.7mm ISO/JIS type)
21EZA199: Spindle lifting lever (12.7mm ASME/AGD type)
21EZA105: Lifting Knob (12.7mm/.5” ISO/JIS Models)
21EZA150: Lifting Knob (12.7mm/.5” ASME/AGD Models)
21EZA197: Lifting Knob (for 25.4/1”mm models)
21EZA200: Lifting Knob (for 50.8/2”mm models)
540774: Spindle lifting cable

Additional information

Weight N/A
Dimensions N/A
Item Type

,

Reviews

There are no reviews yet.

Be the first to review “ABSOLUTE Digimatic Indicator ID-C – Series 543 – Calculation Type”

Your email address will not be published. Required fields are marked *