Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 4 × 4 × 6 in |
3-jaw clamp
Compare$366.42
For holding round parts at one end or in the middle, allowing the probe around the part without interference.
Included: socket head cap screws. OD Min = 1.5 mm, OD Max = 64 mm, ID Min = 47 mm, ID Max = 64
| THD | HT | A | B | C | D | ADJ |
| M6/ M8/ ¼-20 |
127 mm/ 5 in |
178 mm/ 7 in |
56.3 mm/ 2.22 in |
70 mm/ 2.75 in |
19 mm/ 0.75 in |
1.5 mm– 64.5 mm |
Quick Comparison
| Settings | 3-jaw clamp remove | Rotating 3-jaw clamp remove | Micro sliding pusher clamp remove | Soft tip tension clamp remove | Spring pusher standoff clamp remove | Spring wedge clamp remove | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||
| SKU | R-CJ-3 | R-CJR-3 | R-CPSM-4 | |||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||
| Price | $366.42 | $263.19 | $130.20 | Starting at $26.25 Starting at $24.41 | Starting at $48.25 Starting at $44.87 | Starting at $112.00 Starting at $104.16 | ||||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||
| Description | For holding round parts at one end or in the middle, allowing the probe around the part without interference.
Included: socket head cap screws. OD Min = 1.5 mm, OD Max = 64 mm, ID Min = 47 mm, ID Max = 64
| For clamping on inner and outer diameter of part, locking into position then rotated to a marked increment. Not intended for checking part run-out.
Included: socket head cap screws and chuck keys. OD Min = 1.5 mm, OD Max = 27 mm, ID Min = 16 mm, ID Max = 55
| For securing small and delicate parts using a spring pointed Delrin® tip, with minimum force and contact.
Includes socket head cap screws and washers.
| Rubber coated tips hold parts without scratching or marring the surface of a part. | Designed for fixturing small parts in tight or compact space. Ideal for positioning parts and for profile clamping. | Designed for securing parts using a downwards force, instead of using tension clamps. | ||||||||||||||||||||||||||||||||||||||
| Weight | 2 | 2 | 1 | |||||||||||||||||||||||||||||||||||||||||
| Dimensions | 4 × 4 × 6 in | 6 × 6 × 4 in | 4 × 4 × 6 in | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|