Tools
There are six primary configurations of styli to support HPRA. Each is designed to be compatible with standard sizes of block tooling ranging from 5/8 in to 2 in. Each stylus kit is supplied complete with:
• 15 × 15 × 4 stylus assembly
• Break stem
• Stylus extension/adaptor
There are six primary configurations of styli to support HPRA. Each is designed to be compatible with standard sizes of block tooling ranging from 5/8 in to 2 in. Each stylus kit is supplied complete with:
• 15 × 15 × 4 stylus assembly
• Break stem
• Stylus extension/adaptor
There are six primary configurations of styli to support HPRA. Each is designed to be compatible with standard sizes of block tooling ranging from 5/8 in to 2 in. Each stylus kit is supplied complete with:
• 15 × 15 × 4 stylus assembly
• Break stem
• Stylus extension/adaptor
M2 and M3 stainless steel stylus tool
M2 and M3 stylus tool.
Equivalent to Zeiss part number: 602030-0001-000.
Equivalent to Q-Mark part number: PK2-PK3.
| Part Number | A-5555-0233 |
| Zeiss Order Number | 602030-0001 |
| DK | 1.2 mm |
| L | 23 mm |
| Weight | 1 g |
M2 and M3 stainless steel stylus tool
M2 and M3 stylus tool.
Equivalent to Zeiss part number: 602030-0001-000.
Equivalent to Q-Mark part number: PK2-PK3.
| Part Number | A-5555-0239 |
| Zeiss Order Number | 602030-0027 |
| D | 1.7 mm |
| L | 49 mm |
| DK | 2.5 mm |
| Weight | 1.0 g |
M2 and M3 stylus tool
For M2 and M3 threaded styli.
Previous part number: M-5000-3540
Equivalent to Q-Mark part number: PK2-PK3
M2 and M3 stylus tool
For M2 and M3 threaded styli.
Previous part number: M-5000-3540
Equivalent to Q-Mark part number: PK2-PK3
M2 and M3 stylus tool
For M2 and M3 threaded styli.
Previous part number: M-5000-3540
Equivalent to Q-Mark part number: PK2-PK3
M2 carbon fiber stylus tool
For the M2 carbon fiber range of styli.
M2 carbon fiber stylus tool
For the M2 carbon fiber range of styli.
M2 carbon fiber stylus tool
For the M2 carbon fiber range of styli.
M2 Ø4 mm ruby ball, carbon fiber stem, L 100 mm, EWL 100 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.
Equivalent to Q-Mark part number: TM2-40102-G
Tightening tool recommended:Â A-5003-2300
| Thread | M2 |
| Ball Dia | 4 mm |
| Stem material | Carbon Fiber |
| Tip material | Ruby |
| Holder material | Stainless steel |
| Centre styli | N |