Threaded Stylus Range

Showing 1–12 of 448 results

Active filters
Clear Filters

Crash Protection Device

mm in
A – Ball Dia. 16.00 0.63
Mass Grams 2.00

M1.4 Thread Styli, 0.5 mm Ruby Ball, L 12.50 mm

0.5 (0.02)

mm in
A – Ball Dia. 0.50 0.02
B – Length 12.50 0.49
D – Effective Working Ler 3.00 0.12
Mass Grams 0.19

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Zirconia is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Zirconia tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 4 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Zirconia is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Zirconia tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 1 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N

M2 Ø0.3 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 2 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651233
Equivalent to Q-Mark part number: TM2-0310-R
Grade 10 ball

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.3 mm Silicon Nitride ball, tungsten carbide stem, L 10 mm, EWL 2 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Silicon Nitride is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Silicon Nitride tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.30 0.012
B – Length 10.00 0.40
C – Stem Dia. 0.20 0.01
D – Effective Working Length 2.00 0.08
Mass Grams 0.30

M2 Ø0.3mm Zirconia ball styli, tungsten carbide stems, L 10 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Zirconia is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Zirconia tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.50 0.02
B – Length 10.00 0.40
C – Stem Dia. 0.40 0.02
D – Effective Working Length 3.00 0.12
Mass Grams 0.30

M2 Ø0.5 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651233
Equivalent to Q-Mark part number: TM2-0310-R

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.5 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: TM2-0520-07

Thread M2
Ball Dia 0.5 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.5 mm Silicon Nitride ball, tungsten carbide stem, L 10 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Silicon Nitride is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Silicon Nitride tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.50 0.02
B – Length 10.00 0.40
C – Stem Dia. 0.40 0.02
D – Effective Working Length 3.00 0.12
Mass Grams 0.30

M2 Ø0.5 mm Silicon Nitride ball, tungsten carbide stem, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Silicon Nitride is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Silicon Nitride tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 0.5 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.50 0.02
B – Length 20.00 0.79
C – Stem Dia. 0.30 0.012
D – Effective Working Length 7.00 0.28
Mass Grams 0.48

M2 Ø0.5mm Zirconia ball styli, tungsten carbide stems, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Zirconia is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Zirconia tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 0.5 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.50 0.02
B – Length 20.00 0.79
C – Stem Dia. 0.30 0.012
D – Effective Working Length 7.00 0.28
Mass Grams 0.48