M5

Showing 1–12 of 224 results

Active filters
Clear Filters

M2 Ø4mm Zirconia ball styli, carbon fiber stem, L 30 mm, EWL 30 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Zirconia is a tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

Thread M2
Ball Dia 4 mm
Stem material Carbon Fiber
Tip material Zirconia
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 4.00 0.16
B – Length 30.00 1.19
C – Stem Dia. 3.00 0.12
D – Effective Working Length 30.00 1.19
Mass Grams 0.57

M3 180° 1/2 star stylus, Ø3 mm silicon nitride ball, carbon fiber stem, ML 31 mm, for Zeiss applications

M3 1/2 star stylus XXT 180° thermostable.
Equivalent to Zeiss part number: 626103-0314-040.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Part Number A-5555-3891
Zeiss Order Number 626103-0314-040
DK 3 mm
L 40 mm
DG 5 mm
ML 31 mm
DS 2 mm
Weight 1.6 g

M3 Ø5 mm ruby ball, carbon fiber stem, L 60 mm, ML 51 mm, for Zeiss applications

M3 straight stylus XXT thermostable.
Equivalent to Zeiss part number: 626103-0500-060.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Part Number A-5555-3864
Zeiss Order Number 626103-0500-060
DK 5 mm
L 60 mm
DG 5 mm
ML 51 mm
DS 3.5 mm
Weight 1.5 g

M5 Ø0.3 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Ball dia. mm (in.) 0.3 (0.012)
Length mm (in.) 20.0 (0.79)
Stem dia. mm (in.) 0.2 (0.01)
Effective Working Length mm (in.) 3.0 (0.12)
Mass grams 6.5

M5 Ø0.3 mm ruby ball, tungsten carbide stem, L 22 mm, ML 12.8 mm, long thread, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626115-0030-022.

Note: measurement length is to end of ball.

DK 0.3 mm
ML1/ML
2.3 mm  / 12.8 mm
DG/D 11.00 mm
L 21.80 mm
DS1/DS
0.2 mm / 1.0 mm
Weight 6.0 g

M5 Ø0.3 mm ruby ball, tungsten carbide stem, L 22 mm, ML 12.8 mm, long thread, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626115-0030-022.

Note: measurement length is to end of ball.

DK 1.5 mm
ML1/ML
7.00 mm  / 24.00 mm
DG/D 11.00 mm
L 33.00 mm
DS1/DS
1.00 mm / 1.50 mm
Weight 7.0 g

M5 Ø0.3 mm ruby ball, tungsten carbide stem, L 30 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: AFG-0330-03

Ball dia. mm (in.) 0.3 (0.012)
Length mm (in.) 30.0 (1.19)
Stem dia. mm (in.) 0.2 (0.01)
Effective Working Length mm (in.) 3.0 (0.12)
Mass grams 8.95

M5 Ø0.3 mm ruby ball, tungsten carbide stem, L 50 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Ball dia. mm (in.) 0.3 (0.012)
Length mm (in.) 50.0 (1.97)
Stem dia. mm (in.) 0.2 (0.01)
Effective Working Length mm (in.) 3.0 (0.12)
Mass grams 15.79

M5 Ø0.5 mm ruby ball, tungsten carbide stem, L 22 mm, ML 13 mm, long thread, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626115-0050-022.

Note: measurement length is to end of ball.

DK 0.5 mm
ML1/ML
2.5 mm / 13.0 mm
DG/D 11.00 mm
L 22.00 mm
DS1/DS
0.3 mm / 1.0 mm
Weight 6.0 g

M5 Ø0.5 mm ruby ball, tungsten carbide stem, L 30 mm, EWL 4 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: AFG-0530-04

Ball dia. mm (in.) 0.5 (0.02)
Length mm (in.) 30.0 (1.19)
Stem dia. mm (in.) 0.4 (0.02)
Effective Working Length mm (in.) 4.0 (0.16)
Mass grams 8.95

M5 Ø0.5 mm ruby ball, tungsten carbide stem, L 50 mm, EWL 4 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: AFG-0550-04

Ball dia. mm (in.) 0.5 (0.02)
Length mm (in.) 50.0 (1.97)
Stem dia. mm (in.) 0.4 (0.02)
Effective Working Length mm (in.) 4.0 (0.16)
Mass grams 15.79

M5 Ø0.5 mm ruby ball, tungsten carbide stem, L 75 mm, EWL 4 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Ball dia. mm (in.) 0.5 (0.02)
Length mm (in.) 75.0 (2.96)
Stem dia. mm (in.) 0.4 (0.02)
Effective Working Length mm (in.) 4.0 (0.16)
Mass grams 23.84