Steel

Showing 1–12 of 23 results

Active filters
Clear Filters

M2 Ø6 mm ruby ball, stainless steel stem, L 13 mm, ML 13 mm, for Zeiss applications

M2 straight stylus.
Equivalent to Zeiss part number: 602030-8017-000.
Note: measurement length is to end of ball.

Part Number A-5555-0314
Zeiss Order Number 602030-8017
DK 6 mm
L 13 mm
DS 3 mm
DG 3 mm
Weight 0.9 g

M2 Ø6 mm ruby ball, stainless steel stem, L 28 mm, ML 28 mm, for Zeiss applications

M2 straight stylus.
Equivalent to Zeiss part number: 602030-8018-000.
Note: measurement length is to end of ball.

Part Number A-5555-0315
Zeiss Order Number 602030-8018
DK 6 mm
L 28 mm
DS 3 mm
DG 3 mm
Weight 1.8 g

M2 Ø8 mm ruby ball, stainless steel stem, L 13 mm, ML 13 mm, for Zeiss applications

M2 straight stylus.
Equivalent to Zeiss part number: 602030-8019-000.
Equivalent to Q-Mark part number: TM2-8013.
Note: measurement length is to end of ball.

Part Number A-5555-0316
Zeiss Order Number 602030-8019
DK 8 mm
L 13 mm
DS 3 mm
DG 3 mm
Weight 2 g

M3 Ø3 mm Silicon Nitride ball, stainless steel stem, L 21 mm, EWL 14.70 mm

Note: measurement length 21 mm as opposed to 20 mm.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Thread M3
Ball dia 3 mm
Stem material Stainless steel
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm in
Ball dia 3.00 0.12
Length 21.00 0.83
Stem Dia. 1.50 0.06
Effective Working Ler 14.70 0.58
Mass Grams 1.00

M3 Ø5 mm ruby ball, stainless steel stem, L 31.1

Equivalent to Mitutoyo part number: K651152

Equivalent to Q-Mark part number: TM3-5033-S

Thread M3
Ball dia 5 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

Length 100 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Thread M4
Ball dia 5 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M4 Ø5 mm ruby ball, stainless steel stem, L 100 mm, EWL 83.2 mm
Equivalent to Q-Mark part number: TM4-50102-S.

Length 10 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Thread M4
Ball dia 5 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M4 Ø5 mm ruby ball, stainless steel stem, L 10 mm
Equivalent to Q-Mark part number: TM4-5013-S.

Length 30 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Thread M4
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M4 Ø5 mm ruby ball, stainless steel stem, L 30 mm, EWL 26 mm
Equivalent to Q-Mark part number: TM4-5032.5-S.

Length 50 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Thread M4
Ball dia 5 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M4 Ø5 mm ruby ball, stainless steel stem, L 50 mm, EWL 33.5 mm

Equivalent to Q-Mark part number: TM4-5052.5-S.

M4 Ø1 mm ruby ball, stainless steel stem, L 19.5 mm, EWL 4.5 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651186
Equivalent to Q-Mark part number: TM4-1020-S

Thread M4
Ball dia 1 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M4 Ø2 mm ruby ball, stainless steel stem, L 19 mm, EWL 9.2 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651187
Equivalent to Q-Mark part number: TM4-2020-S

Thread M4
Ball dia 2 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M4 Ø2 mm Silicon Nitride ball, stainless steel stem, L 19 mm, EWL 9.20 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Thread M4
Ball dia 2 mm
Stem material Stainless steel
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm in
A – Ball Dia. 2.00 0.08
B – Length 19.00 0.75
C – Stem Dia. 1.40 0.05
D – Effective Working Ler 9.20 0.36
Mass Grams 2.30