> 50mm

Showing all 12 results

Active filters
Clear Filters

M5 Ø10 mm ruby ball, ceramic stem, L 65.5 mm, ML 43.5 mm, for Zeiss applications

M5 straight stylus, for Zeiss applications.

Equivalent to Q-Mark part number: ATG-10065.5-C-19.

Note: measurement length is to end of ball.

DK 10.00 mm
ML1/ML 43.5 mm
DG/D 19.00 mm
L 65.5 mm
DS1/DS 6.00 mm
Weight 38.00 g

M5 Ø10 mm ruby ball, ceramic stem, L 65.5 mm, ML 52.5 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 600342-8019-000.
Equivalent to Q-Mark part number: ATG-10065.5-C.

Note: measurement length is to end of ball.

DK 10.00 mm
ML1/ML 52.5 mm
DG/D 11.00 mm
L 65.5 mm
DS1/DS 6.00 mm
Weight 9.00 g

M5 Ø10 mm ruby ball, thermostable Carbon Fiber stem, L 118.0 mm, ML 105.0 mm, for Zeiss applications

M5 straight stylus, for Zeiss applications.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

DK 10.0 mm
ML1/ML 105.0 mm
DG/D 11.0 mm
L 118.0 mm
DS1/DS 6.0 mm
Weight 14.5 g

M5 Ø10 mm ruby ball, thermostable Carbon Fiber stem, L 150 mm, ML 137 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626105-1020-150.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

DK 10.00 mm
ML1/ML 137.00 mm
DG/D 11.00 mm
L 150.00 mm
DS1/DS 6.00 mm
Weight 16.00 g

M5 Ø10 mm ruby ball, thermostable Carbon Fiber stem, L 200 mm, ML 187 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626105-1020-200.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

DK 10.00 mm
ML1/ML 187.00 mm
DG/D 11.00 mm
L 200.00 mm
DS1/DS 6.00 mm
Weight 19.00 g

M5 Ø10 mm ruby ball, thermostable Carbon Fiber stem, L 65.5 mm, ML 52.5 mm, for Zeiss applications

M5 straight stylus, for Zeiss applications.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

DK 10.0 mm
ML1/ML 52.5 mm
DG/D 11.0 mm
L 65.5 mm
DS1/DS 6.0 mm
Weight 8.0 g

M5 Ø10 mm silicon nitride ball, thermostable Carbon Fiber stem, L 150 mm, ML 137 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626105-1021-150.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 10.00 mm
ML1/ML 137.00 mm
DG/D 11.00 mm
L 150.00 mm
DS1/DS 6.00 mm
Weight 16.00 g

M5 Ø10 mm silicon nitride ball, thermostable Carbon Fiber stem, L 200 mm, ML 187 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626105-1021-200.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 10.00 mm
ML1/ML 187.00 mm
DG/D 11.00 mm
L 200.00 mm
DS1/DS 6.00 mm
Weight 19.00 g

M5 Ø10 mm silicon nitride ball, thermostable Carbon Fiber stem, L 65.5 mm, ML 52.5 mm, for Zeiss applications

M5 straight stylus.

Equivalent to Zeiss part number: 626105-1021-118.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 10.00 mm
ML1/ML 105.5 mm
DG/D 11.00 mm
L 118.00 mm
DS1/DS 6.00 mm
Weight 14.5 g

M5 Ø10 mm silicon nitride ball, tungsten carbide stem, L 118 mm, ML 105 mm, for Zeiss applications

M5 straight stylus, for Zeiss applications.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 10.0 mm
ML1/ML 105.0 mm
DG/D 11.00 mm
L 118.0 mm
DS1/DS 6.0 mm
Weight 47.3 g

M5 Ø10 mm silicon nitride ball, tungsten carbide stem, L 150 mm, ML 135 mm, for Zeiss applications

M5 straight stylus, for Zeiss applications.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 10.0 mm
ML1/ML 135.0 mm
DG/D 11.00 mm
L 150.0 mm
DS1/DS 6.0 mm
Weight 60.0 g

M5 Ø10 mm silicon nitride ball, tungsten carbide stem, L 65.5 mm, ML 52.5 mm, for Zeiss applications

M5 straight stylus, for Zeiss applications.

Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

DK 10.0 mm
ML1/ML 52.50 mm
DG/D 11.00 mm
L 65.50 mm
DS1/DS 6.0 mm
Weight 25.8 g