≥ 30 - ≤ 50mm

Showing 1–12 of 75 results

Active filters
Clear Filters

Extensions are designed to be used when measuring very deep features and bores or when probing points with limited access. Carbon Fiber extensions are lightweight and ideal for applications where thermal stability is essential.

M2 Ø4mm Zirconia ball styli, carbon fiber stem, L 30 mm, EWL 30 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Zirconia is a tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

Thread M2
Ball Dia 4 mm
Stem material Carbon Fiber
Tip material Zirconia
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 4.00 0.16
B – Length 30.00 1.19
C – Stem Dia. 3.00 0.12
D – Effective Working Length 30.00 1.19
Mass Grams 0.57

M2 Ø5mm Zirconia ball styli, carbon fiber stem, L 30 mm, EWL 30 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Zirconia is a tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

Thread M2
Ball Dia 5 mm
Stem material Carbon Fiber
Tip material Zirconia
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 5.00 0.20
B – Length 30.00 1.19
C – Stem Dia. 3.00 0.12
D – Effective Working Length 30.00 1.19
Mass Grams 0.79

M2 Ø6mm Zirconia ball styli, carbon fiber stem, L 30 mm, EWL 30 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Zirconia is a tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

Thread M2
Ball Dia 6 mm
Stem material Carbon Fiber
Tip material Zirconia
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 6.00 0.24
B – Length 30.00 1.19
C – Stem Dia. 3.00 0.12
D – Effective Working Length 30.00 1.19
Mass Grams 0.96

M2 Ø6mm Zirconia ball styli, ceramic stem, L 50 mm, EWL 50 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A ceramic stem is lightweight yet very stiff and offers built-in crash protection. Zirconia is a tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

Thread M2
Ball Dia 6 mm
Stem material Ceramic
Tip material Zirconia
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 6.00 0.24
B – Length 50.00 1.97
C – Stem Dia. 2.50 0.10
D – Effective Working Length 50.00 1.97
Mass Grams 1.49

M3 180° 1/2 star stylus, Ø3 mm ruby ball, carbon fiber stem, ML 31 mm, for Zeiss applications

M3 1/2 star stylus XXT 180° thermostable.
Equivalent to Zeiss part number: 626103-0304-040.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Part Number A-5004-0654
Zeiss Order Number 626103-0304-040
DK 3 mm
L 40 mm
DG 5 mm
ML 31 mm
DS 2 mm
Weight 1.6 g

M3 180° 1/2 star stylus, Ø3 mm silicon nitride ball, carbon fiber stem, ML 31 mm, for Zeiss applications

M3 1/2 star stylus XXT 180° thermostable.
Equivalent to Zeiss part number: 626103-0314-040.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Part Number A-5555-3891
Zeiss Order Number 626103-0314-040
DK 3 mm
L 40 mm
DG 5 mm
ML 31 mm
DS 2 mm
Weight 1.6 g

M3 90° 1/2 star stylus, Ø3 mm ruby ball, carbon fiber stem, ML 31 mm, for Zeiss applications

M3 1/2 star stylus XXT 90° thermostable.
Equivalent to Zeiss part number 626103-0303-040.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Part Number A-5004-3284
Zeiss Order Number 626103-0303-040
DK 3 mm
L 40 mm
DG 5 mm
ML 31 mm
DS 2 mm
Weight 1.6 g

M3 90° 1/2 star stylus, Ø3 mm silicon nitride ball, carbon fiber stem, ML 31 mm, for Zeiss applications

M3 1/2 star stylus XXT 90° thermostable.
Equivalent to Zeiss part number 626103-0313-040.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Part Number A-5555-3886
Zeiss Order Number 626103-0313-040
DK 3 mm
L 40 mm
DG 5 mm
ML 31 mm
DS 2 mm
Weight 1.6 g

M3 clamping stylus XXT Ø3 mm silicon nitride ball, carbon fiber stem, L 30 mm, ML 21 mm, for Zeiss applications

M3 clamping stylus XXT thermostable.
Equivalent to Zeiss part number: 626103-0311-030.
Note: measurement length is to end of ball.

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A Carbon Fiber stem is very lightweight and ideal for applications where weight is critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Part Number A-5555-3878
Zeiss Order Number 626103-0311-030
DK 3 mm
L 30 mm
DG 5 mm
ML 21 mm
DS 2 mm
Weight 0.75 g

M3 Ø0.8 mm ruby ball, tungsten carbide stem, L 34 mm, ML1/ML 4.1/25.0 mm, for Zeiss applications

M3 straight stylus.
Equivalent to Zeiss part number: 626113-0080-034.
Note: measurement length is to end of ball.

Part Number A-5004-1883
Zeiss Order Number 626113-0080-034
DK 0.8 mm
L 34 mm
DG 5 mm
ML 25 mm
ML1 4.1 mm
DS 1 mm
DS1 0.6 mm
Weight 0.80 g

M3 Ø1 mm ruby ball, tungsten carbide stem, L 30 mm, ML1/ML 5.0/21 mm, for Zeiss applications

M3 straight stylus.
Equivalent to Zeiss part number: 626113-0100-030.
Note: measurement length is to end of ball.

Part Number A-5004-3427
Zeiss Order Number 626113-0100-030
DK 1 mm
L 30 mm
DG 5 mm
ML 21 mm
ML1 5 mm
DS 1 mm
DS1 0.8 mm
Weight 0.80 g