Brand

Showing 1–12 of 533 results

Active filters
Clear Filters

M2 Ø0.3 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 2 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651233
Equivalent to Q-Mark part number: TM2-0310-R
Grade 10 ball

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.3 mm Silicon Nitride ball, tungsten carbide stem, L 10 mm, EWL 2 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.30 0.012
B – Length 10.00 0.40
C – Stem Dia. 0.20 0.01
D – Effective Working Length 2.00 0.08
Mass Grams 0.30

M2 Ø0.3 mm tungsten carbide hemispherical ended stylus, L 10 mm, EWL 2.7 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. A stainless stem offers excellent rigidity and is ideal for applications where weight is not critical.

Equivalent to Q-Mark part number: TM2-4022-B

Thread M2
Stem material Stainless steel
Tip material Tungsten carbide
Cylinder dia 0.3 mm

M2 Ø0.5 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651233
Equivalent to Q-Mark part number: TM2-0310-R

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.5 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: TM2-0520-07

Thread M2
Ball Dia 0.5 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.5 mm Silicon Nitride ball, tungsten carbide stem, L 10 mm, EWL 3 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Thread M2
Ball Dia 0.3 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.50 0.02
B – Length 10.00 0.40
C – Stem Dia. 0.40 0.02
D – Effective Working Length 3.00 0.12
Mass Grams 0.30

M2 Ø0.5 mm Silicon Nitride ball, tungsten carbide stem, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Thread M2
Ball Dia 0.5 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N

 

mm In.
A – Ball Dia. 0.50 0.02
B – Length 20.00 0.79
C – Stem Dia. 0.30 0.012
D – Effective Working Length 7.00 0.28
Mass Grams 0.48

M2 Ø0.5 mm tungsten carbide spherically ended cylinder, L 15.3 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. Tungsten carbide tips are ideal for applications demanding a hardwearing interface with an inspected item.

Equivalent to Q-Mark part number: TM2-0515-BC

Thread M2
Stem material Stainless steel
Tip material Tungsten carbide
Cylinder dia 0.5 mm

M2 Ø0.7 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 4 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651236
Equivalent to Q-Mark part number: TM2-0710

Thread M2
Ball Dia 0.7 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø0.7 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 12 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: TM2-0720

Thread M2
Ball Dia 0.7 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø1 mm ruby ball, stainless steel stem, L 10 mm, EWL 4.5 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651012.
Equivalent to Q-Mark part number: TM2-1010-S.

Thread M2
Ball Dia 1 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø1 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 4 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Q-Mark part number: TM2-1010-DS.7

Thread M2
Ball Dia 1 mm
Stem material Tungsten carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N