≥ 1 - ≤ 1.5mm
M2 Ø1 mm ruby ball, stainless steel stem, L 10 mm, EWL 4.5 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.
Equivalent to Mitutoyo part number: K651012.
Equivalent to Q-Mark part number: TM2-1010-S.
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Stainless steel |
| Tip material | Ruby |
| Holder material | Stainless steel |
| Centre styli | N |
M2 Ø1 mm ruby ball, tungsten carbide stem, L 10 mm, EWL 4 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.
Equivalent to Q-Mark part number: TM2-1010-DS.7
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Tungsten carbide |
| Tip material | Ruby |
| Holder material | Stainless steel |
| Centre styli | N |
M2 Ø1 mm ruby ball, tungsten carbide stem, L 10.5 mm, ML 6.5 mm, for Zeiss applications
M2 straight stylus.
Equivalent to Zeiss part number: 602030-8006-000.
Note: measurement length is to end of ball.
| Part Number | A-5555-0308 |
| Zeiss Order Number | 602030-8006 |
| DK | 1 mm |
| L | 10.5 mm |
| DG | 3 mm |
| ML | 6.5 mm |
| DS | 0.8 mm |
| Weight | 0.3 g |
M2 Ø1 mm ruby ball, tungsten carbide stem, L 15.5 mm, ML 11.5 mm, for Zeiss applications
M2 straight stylus.
Equivalent to Zeiss part number: 602030-8007-000.
Note: measurement length is to end of ball.
| Part Number | A-5555-0309 |
| Zeiss Order Number | 602030-8007 |
| DK | 1 mm |
| L | 15.5 mm |
| DG | 3 mm |
| ML | 11.5 mm |
| DS | 0.8 mm |
| Weight | 0.3 g |
M2 Ø1 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 12.5 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.
Equivalent to Mitutoyo part number: K651249
Equivalent to Q-Mark part number: TM2-1020-DS.8
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Tungsten carbide |
| Tip material | Ruby |
| Holder material | Stainless steel |
| Centre styli | N |
M2 Ø1 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 7 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.
| Thread | M2 |
| Ball dia | 1 mm |
| Stem material | Tungsten Carbide |
| Tip material | Ruby |
| Holder material | Stainless steel |
| Centre styli | N |
M2 Ø1 mm ruby ball, tungsten carbide stem, L 27.5 mm, EWL 20.5 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.
Equivalent to Q-Mark part number: TM2-1027-DS.7
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Tungsten carbide |
| Tip material | Ruby |
| Holder material | Stainless steel |
| Centre styli | N |
M2 Ø1 mm ruby spherically ended cylinder, stainless steel stem, L 15 mm
Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical.
Equivalent to Mitutoyo part number: K651034
Equivalent to Q-Mark part number: TM2-1015-B
| Thread | M2 |
| Stem material | Stainless steel |
| Tip material | Ruby |
| Cylinder dia | 1 mm |
M2 Ø1 mm Silicon Nitride ball, stainless steel stem, L 10 mm, EWL 4.5 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Stainless steel |
| Tip material | Silicon Nitride |
| Holder material | Stainless steel |
| Centre styli | N |
| mm | In. | |
| A – Ball Dia. | 1.00 | 0.04 |
| B – Length | 10.00 | 0.40 |
| C – Stem Dia. | 0.70 | 0.03 |
| D – Effective Working Length | 4.50 | 0.18 |
| Mass Grams | 0.30 |
M2 Ø1 mm Silicon Nitride ball, tungsten carbide stem, L 10 mm, EWL 4 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Tungsten carbide |
| Tip material | Silicon Nitride |
| Holder material | Stainless steel |
| Centre styli | N |
| mm | In. | |
| A – Ball Dia. | 1.00 | 0.04 |
| B – Length | 10.00 | 0.40 |
| C – Stem Dia. | 0.70 | 0.03 |
| D – Effective Working Length | 4.00 | 0.16 |
| Mass Grams | 0.30 |
M2 Ø1 mm Silicon Nitride ball, tungsten carbide stem, L 20 mm, EWL 12.5 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Tungsten carbide |
| Tip material | Silicon Nitride |
| Holder material | Stainless steel |
| Centre styli | N |
| mm | In. | |
| A – Ball Dia. | 1.00 | 0.04 |
| B – Length | 20.00 | 0.79 |
| C – Stem Dia. | 0.80 | 0.03 |
| D – Effective Working Length | 12.50 | 0.50 |
| Mass Grams | 0.41 |
M2 Ø1 mm Silicon Nitride ball, tungsten carbide stem, L 20 mm, EWL 7 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.
| Thread | M2 |
| Ball Dia | 1 mm |
| Stem material | Tungsten carbide |
| Tip material | Silicon Nitride |
| Holder material | Stainless steel |
| Centre styli | N |
| mm | In. | |
| A – Ball Dia. | 1.00 | 0.04 |
| B – Length | 20.00 | 0.79 |
| C – Stem Dia. | 0.70 | 0.03 |
| D – Effective Working Length | 7.00 | 0.28 |
| Mass Grams | 0.50 |