Steel

Showing 1–12 of 56 results

Active filters
Clear Filters

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Zirconia is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Zirconia tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 4 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem Diameters. Zirconia is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, Zirconia tips are not recommended for scanning aluminum parts.

Thread M2
Ball Dia 1 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N

M2 Ø0.3 mm tungsten carbide hemispherical ended stylus, L 10 mm, EWL 2.7 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. A stainless stem offers excellent rigidity and is ideal for applications where weight is not critical.

Equivalent to Q-Mark part number: TM2-4022-B

Thread M2
Stem material Stainless steel
Tip material Tungsten carbide
Cylinder dia 0.3 mm

M2 Ø0.5 mm tungsten carbide spherically ended cylinder, L 15.3 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. Tungsten carbide tips are ideal for applications demanding a hardwearing interface with an inspected item.

Equivalent to Q-Mark part number: TM2-0515-BC

Thread M2
Stem material Stainless steel
Tip material Tungsten carbide
Cylinder dia 0.5 mm

M2 Ø1 mm ruby ball, stainless steel stem, L 10 mm, EWL 4.5 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651012.
Equivalent to Q-Mark part number: TM2-1010-S.

Thread M2
Ball Dia 1 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø1 mm ruby ball, tungsten carbide stem, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

 

Thread M2
Ball dia 1 mm
Stem material Tungsten Carbide
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø1 mm ruby spherically ended cylinder, stainless steel stem, L 15 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical.
Equivalent to Mitutoyo part number: K651034
Equivalent to Q-Mark part number: TM2-1015-B

Thread M2
Stem material Stainless steel
Tip material Ruby
Cylinder dia 1 mm

M2 Ø1 mm Silicon Nitride ball, tungsten carbide stem, L 20 mm, EWL 7 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Silicon nitride is similar to ruby in terms of its physical properties. Its lower coefficient of friction makes it ideal for use with most scanning applications, particularly aluminum parts. Silicon nitride is not recommended for scanning cast iron due to abrasive wear.

Thread M2
Ball Dia 1 mm
Stem material Tungsten carbide
Tip material Silicon Nitride
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 1.00 0.04
B – Length 20.00 0.79
C – Stem Dia. 0.70 0.03
D – Effective Working Length 7.00 0.28
Mass Grams 0.50

M2 Ø1 mm Zirconia ball styli, tungsten carbide stems, L 20 mm, EWL 12.5 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A tungsten carbide stem provides exceptional rigidity, particularly for styli with small ball and stem diameters. Zirconia is a tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

Thread M2
Ball Dia 1 mm
Stem material Tungsten carbide
Tip material Zirconia
Holder material Stainless steel
Centre styli N
mm In.
A – Ball Dia. 1.00 0.04
B – Length 20.00 0.79
C – Stem Dia. 0.80 0.03
D – Effective Working Length 12.50 0.50
Mass Grams 0.41

M2 Ø1.5 mm ruby ball, stainless steel stem, L 10 mm, EWL 4.5 mm

Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical. Ruby is regarded as the industry standard for stylus tips. It is one of the hardest materials available and suitable for most applications. Due to adhesive pickup, ruby tips are not recommended for scanning aluminum parts.

Equivalent to Mitutoyo part number: K651013.
Equivalent to Q-Mark part number: TM2-1510-S.

Thread M2
Ball Dia 1.5 mm
Stem material Stainless steel
Tip material Ruby
Holder material Stainless steel
Centre styli N

M2 Ø1.5 mm ruby spherically ended cylinder, stainless steel stem, L 15 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. A stainless steel stem offers excellent rigidity and is ideal for applications where weight is not critical.
Equivalent to Mitutoyo part number: K651035
Equivalent to Q-Mark part number: TM2-1515-B

Thread M2
Stem material Stainless steel
Tip material Ruby
Cylinder dia 1.5 mm

M2 Ø1.5 mm silver steel cylinder, L 10.75 mm

Cylinder styli can be used in situations where correct contact with a ball stylus cannot be guaranteed, such as applications with sheet metal, pressed components or thin work pieces. Silver steel tips are heat treated and precision ground to a high tolerance.
Previous part number: M-5000-4152
Equivalent to Mitutoyo part number: K651030
Equivalent to Q-Mark part number: TM2-1511-CYL

Stem material Silver steel KE108
Cylinder Dia 1.5 mm
Thread M2