Fixture Base Plates

Showing 1–12 of 13 results

Active filters
Clear Filters

Renishaw CMM fixture base plates are precision ground within tight tolerances that are key to the quality of the modular Renishaw fixtures system.
Base plates are available in standard and custom sizes with a choice of threaded holes: M4, M6, M8* or 1/4-20. Cast aluminum base plates are coated with Nituff® hard coat anodize to resist wear and scratching and are available in sizes up to 1500 mm × 3000 mm (60 in × 120 in). Custom sized plates are available to order.
Don’t forget to ask your local sales representative about securing your plate to the CMM granite. This can be done with either Renishaw’s plate clamps or mounting holes.

Renishaw CMM fixture base plates are precision ground within tight tolerances that are key to the quality of the modular Renishaw fixtures system.
Base plates are available in standard and custom sizes with a choice of threaded holes: M4, M6, M8* or 1/4-20. Cast aluminum base plates are coated with Nituff® hard coat anodize to resist wear and scratching and are available in sizes up to 1500 mm × 3000 mm (60 in × 120 in). Custom sized plates are available to order.
Don’t forget to ask your local sales representative about securing your plate to the CMM granite. This can be done with either Renishaw’s plate clamps or mounting holes.

Renishaw CMM fixture base plates are precision ground within tight tolerances that are key to the quality of the modular Renishaw fixtures system.
Base plates are available in standard and custom sizes with a choice of threaded holes: M4, M6, M8* or 1/4-20. Cast aluminum base plates are coated with Nituff® hard coat anodize to resist wear and scratching and are available in sizes up to 1500 mm × 3000 mm (60 in × 120 in). Custom sized plates are available to order.
Don’t forget to ask your local sales representative about securing your plate to the CMM granite. This can be done with either Renishaw’s plate clamps or mounting holes.

Base plates for Renishaw Equator system fixtures use a 3-point kinematic system and can be taken on and off the Equator system within seconds.
The base plates are available in M4, M6, M8 or 1/4-20 thread sizes and are all precision ground within tight tolerances.
Each plate is cast aluminum and coated with Nituff® hard coat anodize to reduce wear and scratching.

Base plates for Renishaw Equator system fixtures use a 3-point kinematic system and can be taken on and off the Equator system within seconds.
The base plates are available in M4, M6, M8 or 1/4-20 thread sizes and are all precision ground within tight tolerances.
Each plate is cast aluminum and coated with Nituff® hard coat anodize to reduce wear and scratching.

Base plates for Renishaw Equator system fixtures use a 3-point kinematic system and can be taken on and off the Equator system within seconds.
The base plates are available in M4, M6, M8 or 1/4-20 thread sizes and are all precision ground within tight tolerances.
Each plate is cast aluminum and coated with Nituff® hard coat anodize to reduce wear and scratching.

Fixturing plate (¼-20 in)

This Equator precision ground aluminium base plate can be loaded on and off the Equator gauging system in seconds thanks to its integral kinematic mounting pins. It has a Nituff® hard anodised coating to resist wear and scratching. The 438 M6 threaded holes are spaced at 12.5 mm intervals to increase the flexibility of your fixture.
Application
Thread
Base plate material
Length: 12 in
Width: 12 in
Height: .50 in

Fixturing plate (M4)

This Equator precision ground aluminium base plate can be loaded on and off the Equator gauging system in seconds thanks to its integral kinematic mounting pins. It has a Nituff® hard anodised coating to resist wear and scratching. The 438 M6 threaded holes are spaced at 12.5 mm intervals to increase the flexibility of your fixture.
Application
Thread
Base plate material
Length: 300 mm
Width: 300 mm
Height: 13 mm

Fixturing plate (M6)

This Equator precision ground aluminium base plate can be loaded on and off the Equator gauging system in seconds thanks to its integral kinematic mounting pins. It has a Nituff® hard anodised coating to resist wear and scratching. The 438 M6 threaded holes are spaced at 12.5 mm intervals to increase the flexibility of your fixture.
Application
Thread
Base plate material
Length: 300 mm
Width: 300 mm
Height: 12.7 mm

Fixturing plate (M8)

This Equator precision ground aluminium base plate can be loaded on and off the Equator gauging system in seconds thanks to its integral kinematic mounting pins. It has a Nituff® hard anodised coating to resist wear and scratching. The 288 M8 threaded holes are spaced at 15 mm intervals to increase the flexibility of your fixture.
Application
Thread
Base plate material
Length: 12 in
Width: 12 in
Height: .50 in

Our acrylic fixture base plates can be customized to fit and mount to your vision stage with a small area in the center of the plate without threaded holes, which allows an unrestricted view for very small parts.
Acrylic base plates are 13 mm (0.50 in) thick and available in sizes from 150 mm × 150 mm (6 in × 6 in) up to 400 mm × 400 mm (16 in × 16 in ), available with M4, M6 or 1/4-20 threaded holes. Custom sized plates are available to order.

There are two base plate options to choose from:
Multi-hole – offers greater flexibility to set up and check as many parts as possible at one time with a clear area in the center of the plate.
Multi-window – more windows for the clearest view of small parts.

Don’t forget to select the correct QuickLoad™ corner (QLC) specific to your vision or multisensor machine to accompany your acrylic base plate. To find the correct QLC compatible with your machine, please contact your local sales representative.

Our acrylic fixture base plates can be customized to fit and mount to your vision stage with a small area in the center of the plate without threaded holes, which allows an unrestricted view for very small parts.
Acrylic base plates are 13 mm (0.50 in) thick and available in sizes from 150 mm × 150 mm (6 in × 6 in) up to 400 mm × 400 mm (16 in × 16 in ), available with M4, M6 or 1/4-20 threaded holes. Custom sized plates are available to order.

There are two base plate options to choose from:
Multi-hole – offers greater flexibility to set up and check as many parts as possible at one time with a clear area in the center of the plate.
Multi-window – more windows for the clearest view of small parts.

Don’t forget to select the correct QuickLoad™ corner (QLC) specific to your vision or multisensor machine to accompany your acrylic base plate. To find the correct QLC compatible with your machine, please contact your local sales representative.