Fixed and Manual Probe Heads

Showing all 8 results

Active filters
Clear Filters

The MH20 is an ultra-compact manually adjustable probe head offering maximum flexibility in probe orientation. The full range of TP20 probe modules can be used via its integral probe mounting. The MH20 is incompatible with the MCR20.

Probe mounting TP20 kinematic mount
Head mounting MS/T range of shanks
Suitable interfaces PI4-2, PI200-3 or PI7-3
Number of probe sockets 1
Probe status indication 1 LED
Cable connection 5 pin DIN 180° socket
A-axis indexing Non-indexing swivel ±93°
B-axis indexing Non-indexing swivel ±300°
Maximum extension bar EM2 extension module – 75 mm (2.95 in)

The MH20i offers the significant advantage of repeatable indexing positions, vastly improving productivity for multi-orientation measurement applications. The MH20i is incompatible with the MCR20.

Probe mounting TP20 kinematic mount
Head mounting MS range of shanks
Suitable interfaces PI4-2, PI200-3 or PI7-3
Number of probe sockets 1
Probe status indication 1 LED
Cable connection 5 pin DIN 180° socket
A-axis indexing 0° to 90° in 15° repeatable steps
B-axis indexing 180° in 15° repeatable steps
Repeatability of position 1.5μ (0.00006 in) with TP20 and 10 mm stylus
2.5μ (0.00001 in) with EM2 extension module and 10 mm stylus
Maximum extension bar EM2 extension module – 75 mm (2.95 in)

A manually indexable probe head with repeatable indexing, eliminating the need to requalify the stylus tip position after orientation. The MH8 can be used with the TP6 probe directly or with the TP20 probe with up to 50 mm extension. An easy upgrade, as there is no need for special software, cabling, or electronics.

2σ positional repeatability 1.5 μm
Probe status indication 1 LED
Cable connection 5 pin DIN type connector
A-axis indexing 0° to 90° in 15° steps = 7 positions
B-axis indexing ±180° in 15° steps = 24 positions
Total number of positions 168
Maximum support capability TP6 mounted directly
TP20 with PEL1 50 mm extension
Probe mounting M8 bush
Mounting options Shank to suit your CMM

A manually indexable head, repeatable in 720 positions over two axes with LCD display, the MIH is designed for use with the autojoint TP6A touch probe and long extensions for large components. TP2, TP6, TP20 touch probes can be used with the addition of the PAA1 or PAA2 extensions.

2σ positional repeatability 1 μm
Probe status indication 1 LED
Cable connection 5 pin DIN 180° socket
A-axis indexing 105° to 0° in 15° in 7.5° steps = 15 positions
B-axis indexing ±180° in 7.5° steps = 28 positions
Probe mounting Autojoint
Mounting options Shank to suit your CMM

A small swivel head, adjustable in both the A and B axes, with limited overtravel protection. The probe is offset from the mounting shank Z axis.

Number of probe sockets 1
Probe status indication 1 LED
Cable connection 5 pin DIN 180° socket
Overtravel break load Adjustable from 20 gf (0.7 ozf) to locked solid
A-axis indexing Swivel of 115° locked with hexagonal key (3 mm A/F)
B-axis indexing 15° steps through 360°
Weight 125 g (4.5 oz)
Mounting options Shank to suit your CMM

A compact, vertical probe head for a single probe, with a choice of integral cables.

Number of probe sockets 1
Probe status indication 1 LED
Cable connection Integral cable
Mounting options Shank to suit your CMM
Weight 48 g

The PH6A is designed for use with autojoint probes and allows you to change probes or add extensions without having to requalify the probe. Special order only.

Number of probe sockets 1
Probe status indication 1 LED
Cable connection 5 pin DIN 180° socket
Mounting options Shank to suit your CMM

A fixed head with autojoint connection for probes and adaptors. For use with TP7M, SP600M, and SP25M.

Number of probe sockets 1 autojoint
Probe status indication 1 LED
Cable connection Micro ‘D’ connector
Mounting options Shank to suit your CMM