Dial Indicators

Showing 1–12 of 165 results

Active filters
Clear Filters

The new Calculation-Type Digimatic Indicator features both a Key- Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Improved parameter setting software makes easy to set all available parameters, and determine and upload the proper coefficients for calculation. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50, allowing higher accuracy measurements of TIR and MAX/MIN.
An analog bar provides easy-to-read values when scanning for Max, Min, and TIR Values.
The Absolute Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x) while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without the need for conversions.

The new Calculation-Type Digimatic Indicator features both a Key- Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Improved parameter setting software makes easy to set all available parameters, and determine and upload the proper coefficients for calculation. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50, allowing higher accuracy measurements of TIR and MAX/MIN.
An analog bar provides easy-to-read values when scanning for Max, Min, and TIR Values.
The Absolute Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x) while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without the need for conversions.

The new Calculation-Type Digimatic Indicator features both a Key- Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Improved parameter setting software makes easy to set all available parameters, and determine and upload the proper coefficients for calculation. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50, allowing higher accuracy measurements of TIR and MAX/MIN.
An analog bar provides easy-to-read values when scanning for Max, Min, and TIR Values.
The Absolute Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x) while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without the need for conversions.

The new Bore Gage-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it easy to set all available parameters. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50.
The minimum value holding function provides the easy detection of hole diameter.
An analog bar indicator is integrated to enhance the intuition in reading.
Go/no-go judgment is performed by setting the upper and lower tolerances.
Up to three sets of master values and upper/lower tolerance values can be memorized.
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin when turned on.

The new Bore Gage-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it easy to set all available parameters. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50.
The minimum value holding function provides the easy detection of hole diameter.
An analog bar indicator is integrated to enhance the intuition in reading.
Go/no-go judgment is performed by setting the upper and lower tolerances.
Up to three sets of master values and upper/lower tolerance values can be memorized.
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin when turned on.

The new Bore Gage-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it easy to set all available parameters. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50.
The minimum value holding function provides the easy detection of hole diameter.
An analog bar indicator is integrated to enhance the intuition in reading.
Go/no-go judgment is performed by setting the upper and lower tolerances.
Up to three sets of master values and upper/lower tolerance values can be memorized.
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin when turned on.

Similar in size to Series 2 dial indicators.
As compact as standard Series 2 dial indicators.
Large, easy-to-read LCD.
GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
The positive/negative count resulting from the spindle’s up/down movement can be toggled.
Internal calculations using the simple formula of [F(x)=Ax)] are available
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
With SPC data output.

Similar in size to Series 2 dial indicators.
As compact as standard Series 2 dial indicators.
Large, easy-to-read LCD.
GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
The positive/negative count resulting from the spindle’s up/down movement can be toggled.
Internal calculations using the simple formula of [F(x)=Ax)] are available
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
With SPC data output.

Similar in size to Series 2 dial indicators.
As compact as standard Series 2 dial indicators.
Large, easy-to-read LCD.
GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
The positive/negative count resulting from the spindle’s up/down movement can be toggled.
Internal calculations using the simple formula of [F(x)=Ax)] are available
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
With SPC data output.

The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it even eay to set all available parameters.
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
High speed sampling ratio of 50 times/s.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.

The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it even eay to set all available parameters.
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
High speed sampling ratio of 50 times/s.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.

The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it even eay to set all available parameters.
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
High speed sampling ratio of 50 times/s.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.