Micrometers

Showing 1–12 of 57 results

Active filters
Clear Filters

Fast and accurate method of thread measuring available for use with Micrometer

‘- Constant and low measuring force mechanism in the thimble
– Adjustable measuring force* accommodates various kind of work materials. *0.5-2.5N or 2-10N
– The measurement-value hold function automatically retains the data at a specified measuring force, ensuring accuracy.
– Non-rotating spindle and the new ratchet friction thimble.
– Speedy spindle feed of 10mm/rev. and .4”/rev for inch/metric model.
– With absolute linear scale.
– With SPC data output.
– With a standard bar to set the origin point (for models with 15 – 30mm / .6” – 1.2” range).
– Supplied in fitted plastic case.

The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach areas.
With Ratchet Stop for constant force.
Speedy spindle feed of 10mm / .4”/rev. (Quickmike type).
With a standard bar except 0 -25mm and 0 – 1” model.
Supplied in fitted plastic case.

With Ratchet Stop for constant force.
With SPC output (Series 343).
With a standard bar except 0 – 25mm and 0 – 1” model.
Supplied in fitted plastic case.

Measures the width, height, and depth of can seams.
Three types of micrometers are available for: steel cans, aluminum cans, and sprayer cans.
Supplied in fitted carton.

Coolant Proof Micrometers MDC-MX Series
Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency

IP65 protection level, enabling use in environments exposed to cutting oil, etc*.
*Anti-corrosion treatment is required after use.

Measurement data output function is available with a water-resistant connection cable.

Auto power ON/OFF function. • Certificate of inspection* is included.
(50mm/2” or less range models) *It is not the type used to obtain calibration certificates.

With a standard bar except for 0-25mm/0-1″ model.
Supplied in fitted case. Plastic case up to 150mm/6″, Wooden box over 150mm/6″

IP54/65 water/dust protection(Series 342).
Measures the height of crimp contacts.
With Ratchet Stop for constant force.
With SPC output(Series 342).
With digit counter counter(Series 142).
Supplied in fitted plastic case.

Direct GO/NO-GO judgment for massproduced parts.
Spindle diameter: 10.8mm (.425″)
IP protection level: 54
Supplied in fitted plastic case.

Accuracy: Refer to the list of specificatictions

Resolution: 0.001mm or .00001″/0.001mm

Flatness: 0.6µm / .000024”
Parallelism: 5µm / .0002” for models up to 375mm / 15”
6µm / .00024” for models up to 475mm/19”
7µm / .00028” for models over 500mm / 20”
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 1.8 years under normal use

‘- Provided only with a zero-set key for easy origin setting.
– A ratchet stop or friction thimble for a constant measuring force.
– Measurement readout with large characters on the LCD screen.
– No spindle clamp. No data output
– Supplied in fitted plastic case

Mechanical digit counter with 0.01mm or .001″ reading for quick and error-free reading
With a standard bar except for 0-25mm / 0 -1” model.